1. The process of passing iron
The crusher is a common equipment used in mining, construction and other industries. It can perform coarse and medium crushing of stone. During the production process, iron impurities often appear. At this time, it is necessary to pass the iron through the crusher to ensure the normal operation of the equipment and the quality of the products produced.
The principle of passing iron is to filter raw stone through magnetic separator or ironware and other equipment to filter out iron impurities, so that the iron content in the stone is reduced to a very low level to ensure the normal progress of subsequent processes.
2. Possible problems and solutions during the process
During the process of passing iron, some problems will also occur, such as a failure of the magnetic separator causing the iron to fail to pass, too much iron causing the magnetic separator to be unable to handle it, etc. These problems will affect the filtration effect of iron, thereby affecting the working efficiency of the entire production line. So, we can take the following measures to solve these problems:
1. Perform regular maintenance on the equipment and replace faulty parts in a timely manner to ensure the normal operation of the equipment;
2. Adjust the strength of the magnetic separator to make it more suitable for the current iron content;
3. Pretreat the stone to reduce the iron content as much as possible and reduce the difficulty of passing iron.
3. The importance of crusher passing iron
Crusher passing iron can not only ensure the normal operation of the equipment and the quality of the products, but also reduce the failure rate of the entire production line and reduce equipment maintenance costs. The iron-treated stone has lower iron content and is more suitable for subsequent production processes, which can improve production efficiency and reduce production costs.
In short, the iron passing of the crusher plays an important role in ensuring the normal operation of the equipment and improving production efficiency. In actual operations, we should adopt different iron passing methods according to different situations and perform appropriate maintenance on the equipment to ensure the operating efficiency and product quality of the entire production line.
