1. Read the instruction manual before operation
After purchasing crusher equipment, you should carefully read the relevant instructions for use of the crusher and become familiar with the use and maintenance of the crusher.
2. It is prohibited to use unqualified power supply
Use an unqualified power supply, do not place too many unbaked electrodes, move the electrodes as little as possible or do not move the motor when lowering the electrodes and after lowering the electrodes, and take various measures to prevent soft breakage of the electrodes. Once a soft break occurs, it must be dealt with immediately.
3. Control the oil volume of the crusher and the air pressure of the hydraulic tank
Pay attention to the air pressure of the fuel tank at all times. During work, the pressure of the pressure-type fuel tank must be maintained within the specified range. If the pressure is too low, it will be easily damaged and the oil pump will not absorb enough oil. If the pressure is too high, the low-pressure oil line of the hydraulic system of the crusher will burst.
4. It is prohibited to only use without maintaining
Maintenance is very important for the crusher. Long-term use will cause unnecessary wear and tear on the machine, so you should regularly check the wear and tear of the machine, perform regular maintenance, and apply lubricating oil regularly to make your machine play a greater role.
5. Conduct regular inspections
During operation, pay attention to the temperature of the bearings, keep the bearings well lubricated at all times, and pay attention to whether the sound and vibration are abnormal. If any abnormality is found, stop the machine and check whether it is covered with anything that is not easily broken.
